|
A beautiful contemporary dining table
designed by the masterful Ale Sticotti.
The DT7188 shows Sticotti's ability to
create an optimal design with very few means. The table could not be more
simple, yet Sticotti makes the total sum of the individual components and
aesthetic experience out of the ordinary.
Materials:
Solid American beech or American walnut frame; tempered clear glass
top.
Dimensions:
Glass top: 225 x 85 cm (W X D)
Glass thickness: 15mm
Table height: 75cm
|
The reproduction LC6 Table was designed as
part of the “living equipment” for the Modern Art Salon in Paris 1929.
Suitable as a dining or conference table
the LC6 is adjustable in height to a range of approximately 5cm.
The 15 mm tempered glass top sits on a
matte black-lacquered steel base with original-shaped oval tube.
Material:
Hollow steel tube; tempered clear glass top
Measurements:
225 x 85 x 69/74 cm (W x D x H)
|
The reproduction Platform Bench (1947) is
perfectly designed with crisp lines that are architectural, clean, and
timeless.
Use it as bench, an accent table or a
display rack.
Material:
Natural ash top, birch legs painted black.
Measurements: Small
122 x 47 x 36.5 (W X D X H) cm
Measurements: Medium
152.5 x 47 x 36.5 (W X D X H) cm
Measurements: Large
183 x 47 x 36.5 (W X D X H) cm
|
The reproduction of the PK61 Coffee Table
has a stainless steel base and is typical of other Kjaerholm designs: square,
aesthetic and minimal.
Material:
Glass thickness: 19mm
Measurements:
80 x 80 x 30 (WxDxH) cm
|
|
The reproduction Cyclone dining table,
designed in 1957, has a sculptural base consisting of a column of chrome
plated steel wires set into a black lacquered cast iron base.
The top is plywood with a black or
white veneer laminate top. This piece is of exceptional quality.
Dimensions:
Top: 107cm diameter
Height: 76cm
|
Designed by Charles and Ray Eames in
1964, this replica table blends simplicity with sophistication.
Material:
Light oak veneer top; black painted tubular double steel pedestal; aluminium
base.
|
Designed by Charles and Ray Eames in 1964,
this replica table blends simplicity with sophistication.
Material:
Light oak veneer top; black painted tubular steel pedestal; aluminium base.
|
High
quality reproduction Barcelona Table (1927) expresses a clarity of form and
materials that is immediately recognizable.
The
regal simplicity of the table’s base is finely executed atop rests a 3/4"
glass tabletop. The seamless, single-piece construction of the base ensures
precision and durability.
|
|
With its refined material details, including
hand-worked stainless steel legs, the low rectangular table is linked by black
lacquered rails and topped by a slender glass top that makes it a suitable
solution in contemporary homes as well as the reception areas of offices.
Material:
Black lacquered steel profile with stainless steel legs.
Tempered clear glass top, 15mm thickness
Dimensions:
120 x 80 x 33 cm ( W x D x H ). Simple assembly required.
|
This is a set of two tables,
Marcel Breuer reproduction display table set.
Perfect for your minimalist entertainment
center, sculpture displays or other stand.
A short ( 22 x 19 x 18) and a long one
(53.5 x 19 x 13).
Chrome plated steel frames, tops in
laminated plywood. Available in black or white.
A Classic design that will never fade away |
Nicknamed the "Surfboard Table", this
elongated Elliptical Table (1951) exemplifies the delightful playfulness of that
era and reveals a desire to create furniture that would become a part of a life
lived with simplicity and beauty.
Thus, the 180 cm table sets the stage for
a bowl of fresh flowers, an exquisite work of art or a big picture book.
Representing a whole new design language when it appeared in 1951, the table's
light wire base and long lean silhouette look just as refreshingly modern today
as then.
|
The reproduction Noguchi
Table conceals nothing. Two simple, smoothly shaped pieces interlock to form a
tripod that supports a 19mm thick slab of transparent tempered glass.
Practical and beautiful, the
Noguchi Table will uphold a variety of objects in a professional reception area
or the home.
Available in 19mm clear glass top and solid natural walnut, solid American ash,
solid American walnut or solid American ash stained black base. |
|
Modular design
Versatile arrangement of tables
Dimensions:
56 x 34 x 28 cm (H x D x W); 40 x 50 x 28 cm (H x D x W)
Available in light ash veneer or
walnut veneer timber
|
Reproduction Ludwig Mies van der Rohe MR
Coffee Table - 1927.
Material:
Stainless tubular steel; hardened clear glass top.
|
This height-adjustable table from 1927 is
one of the eras's most rational designs and reflects a desire for functional
perfection.
Originally conceived as a bedside
table for the guest room in a mansion in Cap Martin, it is also useful as a
side table in living rooms, office reception areas or, (thanks to durable
materials), on the terrace.
Its purist aesthetic complements a
wide range of furnishings and settings. Simple assembly required.
Material:
Stainless Steel, not chrome.
|
The
Wire-Base Table is remarkable for the elegance achieved using simple,
practical materials. Its scaled-down profile shows the influence of Japanese
forms and households based on an aesthetic ideal of simplicity, serenity and
restraint. Just 26cm high, the table provides a handy surface for a stack
of books or a place to rest a drink.
Material:
Laminate top; multi plywood core; stainless steel base
Measurements:
39 x 33 x 26 (WxDxH) cm
Available in black or white top
|
|
The
Coffee Table Wood (CTW), designed in 1946, is a simple occasional table with
a round plywood table top slightly raised at the edges and 4 plywood legs.
this table goes well with our plywood dining and lounge chairs.
Colours: Available in
walnut, rosewood and natural oak outer ply veneers.
Measurements: 860mm round x 400mm high
This table is an exact replica of the
original design.
|
|
|
|
